How To Clean & SEAL Sandstone Pavers

Sandstone is a material chosen often for its natural beauty and versatility, as it is used in just as many indoor applications as it does outdoors. But like all natural stone materials, it requires consistent care and maintenance to protect its surface. This guide will outline the basics of cleaning and sealing sandstone, but while DIY care is possible, professional maintenance is always the most effective and long-term solution. If you’re looking for more assistance, you can visit our Sandstone Service Page for more detailed information.

How to tell if your sandstone pavers need cleaning and sealing?

To keep your sandstone looking its best, watch for these signs that will indicate it needs attention:

Patches of discoloration or staining
A dull or lifeless appearance
Exposure to poolside or coastal conditions
Efflorescence (white, powdery residue on the surface)
Cracks or crumbling caused by weathering
General wear from heavy use

For the best results, we recommend sealing your sandstone after cleaning, whether it’s a newly installed surface or an older one. This will help maintain its fresh appearance for longer.

How to Clean Sandstone Pavers

Regular cleaning is essential to protect your sandstone’s natural charm. Follow this simple routine to keep it looking great:

Clean Your Surface: Sweep away debris and loose dirt with a broom or blower.
Gentle Washing: Use a pH-neutral stone cleaner like our #JUSTSEALIT Stone Wash for routine cleaning.
Spot Treatment: Address stains with a targeted cleaner such as #JUSTSEALIT Stain Aid, using a soft brush for precise cleaning.
Rinse Thoroughly: Ensure all cleaning residue is washed away to prevent streaks or film build-up.
Dry Completely: Allow the surface to air dry fully, or use a towel to avoid watermarks. Make sure the surface is completely dry before sealing.

While this routine will help with regular care, a deeper cleaning may be necessary for tougher stains or build-up. For these situations, Prestige Surfaces offers expert sandstone cleaning services designed for long-standing results.

How to seal your sandstone Pavers

Sealing sandstone is vital for protection from damage and will make ongoing maintenance easier. For effective sealing:

To Start the Clean: Begin by thoroughly cleaning the sandstone surface to remove all dirt, debris, and stains. Ensure the area is completely dry to allow the sealer to bond properly.
Choose a High-Quality Sealer: Select a penetrating, breathable sealer such as #JUSTSEALIT Classic Stone Sealer, designed to provide optimal protection while preserving the natural look and slip resistance of sandstone.
Apply Evenly: Use a microfibre applicator, roller, or low-pressure sprayer to apply the sealer in a smooth and even layer. For optimal coverage, Apply two wet-on-wet coats. Ensure the temperature during application is between 10-30°C to achieve the best results.
Curing Time: Allow the sealer to cure and dry fully by following the product’s specific instructions.

Sealing sandstone not only prevents stains and weather damage but will also save a lot of time and effort required in the future. If you’re second guessing yourself with this process then look at hiring Prestige Surfaces to handle the job.

Our Cleaning and Sealing Products

#JUSTSEALIT Plus Stone Sealer

#JUSTSEALIT Classic Stone Sealer

#JUSTSEALIT Stain Aid & Cleaner

#JUSTSEALIT Stone Wash

Why Choose Prestige Surfaces for Sandstone Care?

Prestige Services are dedicated to restoration and care of sandstone surfaces. We use specialised techniques alongside our #JUSTSEALIT products to deliver tailored solutions to your surfaces. Whether you’re sealing a new installation or reviving an old surface, our team will guarantee exceptional results every time.

Still Not Sure? Let Us Help!

Save yourself a headache and learn the right care for your sandstone and check out our full Sandstone Service Page for more detailed information. Contact us today and fill your need for expert cleaning and sealing services, or if you are still looking to DIY, then explore our #JUSTSEALIT product range designed for Australian conditions.

READY TO BOOK?

HAVE MORE QUESTIONS?

SOME EXAMPLES OF OUR WORK

HEAR FROM OUR CLIENTS

“Matt’s keenness to please and his passion for perfection along with his people skills and organisation skills are what make for long lasting partnerships in our industry. As with any job in this sector you need to have stamina, the hours are often long and you need a degree of physical as well as mental toughness and you need to be able to problem solve on your feet – Matt has these attributes. Matt and his team’s willingness to collaborate on jobs result in the best outcome...

DAVE FRANKLIN, FRANKLIN LANDSCAPE AND DESIGN PTY LTD

“I got Prestige Surfaces in to clean and seal my travertine pavers. Amazing results. I couldn’t believe how clean they got them. The sealing has made them easy to maintain. Highly recommend.”

RESIDENTIAL CLIENT

“Essendon Landscaping and Construction have been working with Prestige Surfaces for the past 5 years and have found there service and quality second to none in the Landscaping Industry. For all our stone cleaning and sealing requirements we only use and recommend Prestige Surfaces!”